9FQ model Corn Hammer Mill animal feed grinderThe machine processing range is very wide, It can crush corn, wheat, beans, grains, rice, potato; Shell and other food and feed,And crushing gesso, lead powder, slide powder, rare earth, chemical, pottery clay, coal and other minerals low hardness etc.
Brief introduction Our 9FQ Poultry animal Feed Grain Grinder Hammer milling Machine is widely used in metallurgy, mining, chemical, cement, construction, industrial and mining industries, and used in medium and fine crusher. The compressive strength is not over 320Mpa.
This hammer crusher is mainly component of casing, rotor, hammers and bars. The case is divided into two parts: up and down, which is connected by welding the cut steel; other parts are connected by screws. The one inside of case is high manganese steel lining board, which is easy to change when wore out. There are several hammers in the spindle, which make up of rotor together with turntable and wear hammer shaft. It works through motor and V-belt to drive spindle and rotor rotating, so that centrifugal force producing by the hammer rotating spread out. Then when the big material was put into crushing chamber, it was crush by the high speed hammer. Afer those process, the standard material was screen out by down bar and non-standard one was left on the crushing chamber and crush again. In order to avoid clogging, humidity of crushed material should below 10%-15%.
Working PrincipleThe main working part of Hammer mill is the rotor with hammers.The rotor consists of main shaft, disk,hinge pin and hammers.A sieve plate is below the rotor.The motor drives the rotor to rotate at a high speed.When the materials get into the crushing cavity,they are crushed by the rotating hammers,the crushed products which meet the required size can be discharged from the sieve plate and become the final products,the products with larger size are brought back to the crushed area for being re-crushed until they reach the required size.
It is ideal for grinding grains, such as rice, corn, wheat, etc. The fineness can reach 50-120 mesh through changing different screens.1. The Grinder mill machine is our factory new design. It has higher grinding efficiency and lower energy consumption, easy to be operated.
2. Our grinder mill is most ideal grinder equipment of all kinds grain of pulverize corn, soy bean, sorghum, barley, grain, legumes, rice, maize, dried sweet potato slices, soy bean cake etc, and also can grinding all kinds of crop stalks, such as corn stalks, peanut skins, corn stems, clover, grass, peanut shoots, rice straw, wheat straw etc.
3. This type grinder mill machine is widely used in the professions such as energy pellet factory, feed animal farm, home and so on. This final product size can arrive in more than 0.6mm range! In this range can meet you need any size sieve mesh! When this series of grinders are used to grind corn, corn stalk, peanut shells, beanstalk and other materials such as peanut skins, clover, grass, rice straw, wheat straw, straw with the water content, there of being lower than 14% with sieves with the diameter of sieve pores being 2mm, the yield of the grinders can reach the following indexes:
We have different models,you can choose any model according to your materials.
| MODEL |
WS9FQ-280 |
WS9FQ-320 |
WS9FQ-350 |
WS9FQ-360 |
WS9FQ-400(With cyclone) |
WS9FQ-420(with cyclone) |
WS9FQ-500(with cyclone) |
WS9FQ-1000(with cyclone) |
| Blade(PC) |
gears |
16 |
16 |
16 |
16 |
24 |
24 |
32 |
| Power (KW) |
1.1 |
2.2 |
3 |
5.5 |
7.5 |
11 |
15 |
22 |
| OUTPUT(KG/H) |
100-150 |
300-500 |
500-700 |
700-900 |
1000-1200 |
1200-1500 |
1500-2000 |
5000-6000 |
